Epson Stylus Pro 3800 - Removing the SENSORS and SWITCHES

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 125
4.3.6 Removing the SENSORS and SWITCHES
4.3.6.1 LOCK, COVER, ASSY.
1. Perform step 1. to step 10. in “4.3.3.12 HOUSING, UPPER” (p107), and remove
the HOUSING, UPPER from the main unit.
2. Release the two hooks that secure the LOCK, COVER, ASSY. with a precision
screwdriver or similar tools to remove the LOCK, COVER, ASSY.
Figure 4-45. Removing the LOCK, COVER, ASSY.
Be sure to insert the two positioning holes of the LOCK, COVER,
ASSY. over the guide pins of the HOUSING, UPPER.
LOCK, COVER, ASSY
positioning points
Left side of the printer
LOCK, COVER, ASSY.
HOUSING, UPPER
hooks