Epson Stylus Pro 3800 - Removing the PAPER FEED MECHANISM

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 184
4.3.10 Removing the PAPER FEED MECHANISM
4.3.10.1 SCALE, PF, 180
1. Remove the HOUSING, UPPER. (p107)
2. Peel off the double-sided tape that secure the SCALE, PF, 180, and remove it from
the COMBINATION GEAR, PF, DRIVE.
Figure 4-126. Removing the SCALE, PF, 180
C A U T I O N
Be careful not to deform or damage the SCALE, PF, 180 when
carrying out the following steps.
Insert the two positioning holes of the SCALE, PF, 180 over the two
ribs of the COMBINATION GEAR, PF, DRIVE, to secure the
SCALE, PF, 180.
holes
ribs
SCALE, PF, 180
COMBINATION GEAR,
PF, DRIVE
SCALE, PF, 180
COMBINATION GEAR,
PF, DRIVE