Epson Stylus Pro 3800 - Ink Mark Sensor Adjustment for Auto Nozzle Check

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
ADJUSTMENT Standard Adjustment 249
5.3.13 Ink Mark Sensor Adjustment for Auto Nozzle
Check
 Purpose
 Verifies the sensitivity of the ink mark sensor. Malfunction of the sensor or
poor connection status can be found.
 Corrects the auto position of the ink mark sensor.
 Checks if the ink mark sensor functions normally using the auto nozzle check.
 Paper Used
 Size: A4/Letter
 Type: Economy SuperFine Paper
 Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [Ink Mark Sensor Adjustment for
Auto Nozzle Check].
3. Click [Run] to print an adjustment pattern. The printer will automatically
conducts the adjustment.
4. Click [Finish].
Figure 5-58. [Ink Mark Sensor Adjustment for Auto Nozzle Check] Screen