Epson Stylus Pro 3800 - Page 116

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 116
A D J U S T M E N T
R E Q U I R E D
Whenever the BOARD ASSY., MAIN is replaced, the
corresponding adjustments must be carried out.
See Chapter 5 "ADJUSTMENT" (p208).
<Adjustment Item>
 NVRAM Backup OK
1. Install F/W
2. Parameter Backup
3. RTC&USB ID
 NVRAM Backup NG
1. Head Rank ID
2. RTC&USB ID
3. Input Serial Number
4. Initial Ink Charge Flag ON/OFF
5. Install F/W
6. Write Constant When CR change
7. Print Head Slant Adjustment (CR)
8. PG Position Adjustment
9. Print Head Slant Adjustment (PF)
10. Ink Mark Sensor Adjustment for Auto Nozzle Check
11. Auto Uni-D Adjustment
12. Auto Bi-D Adjustment
13. T&B&S Adjustment
14. PF Adjustment
15. EJ Adjustment
16. Colorimetric Calibration Tool
17. Print Image