Epson Stylus Pro 3800 - Page 155

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 155
8. Remove the three screws that secure the FRAME, HOLDER, IC, ASSY.
 Three C.B.S. 3 x 6 screws (9 ± 1 kgf.cm)
9. Use a precision screwdriver or a similar tool to pull out the guide pin of the
HOLDER, TUBE from the FRAME, TOP, ASSY., and release the HOLDER,
TUBE.
Figure 4-82. Removing the screws from the FRAME, HOLDER, IC, ASSY.
C.B.S. 3x6
HOLDER, TUBE
guide pin
C.B.S. 3x6
C.B.S. 3x6
FRAME, HOLDER, IC, ASSY.
Left side of the printer
FRAME, TOP,
ASSY.