Epson Stylus Pro 3800 - Color Management

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 163
6. Slide the GUIDE, TUBE, CR in the direction of the arrow to release the hooks
from the three guide pins on the CARRIAGE, ASSY., and remove it. See Figure
4-91.
7. Remove the three screws that secure the LEAF SPRING, LOCK, HEAD, and
remove it upward.
See Figure 4-92.
 Three C.B.P. 2.5 x 8 screws (3 ± 0.5 kgf.cm)
Figure 4-91. Releasing the GUIDE, TUBE, CR
Figure 4-92. Removing the LEAF SPRING, LOCK, HEAD
Put the far left section of the LEAF SPRING, LOCK, HEAD under
the HARNESS, HEAD, A/B and the film, to install it.
HARNESS, HEAD, A/B
and film
CARRIAGE, ASSY.
guide pins
GUIDE, TUBE, CR
LEAF SPRING,
LOCK, HEAD
C.B.P. 2.5x8