Epson Stylus Pro 3800 - Page 18

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
PRODUCT DESCRIPTION Print Mode 18
AUTOMATIC EXPANSION SPECIFICATION
The driver automatically changes margins that bleed off the edges of paper according
to the paper size.
Note : The number of dots are based on 360 dpi.
PRINTABLE AREA
Figure 1-4. Printable Area
Note : Print start position can be shifted toward the home position by 8 m by changing the appropriate
setting.
Table 1-6. Borderless Printing Margins (Bleed)
L/4” x 6”
16:9 Wide
5” x 7”
8” x 10”
A4 / Letter
11” x 14”
A3/A3+
A2/USC
Top 1.34mm (19dot) 2.96mm (42dot) 3.32mm (47dot)
Left/Right 2.54mm (36dot) 3.46mm (49dot) 4.52mm (64dot)
Bottom 2.54mm (36dot) 4.02mm (57dot) 4.52mm (64dot) 5.01mm (71dot)
3.5m (max)
5mm (max)
5mm
(max)
Width-direction
printable area
Printable area
Paper width
Page control
coordinate origin
Printing position coordinate origin
Paper edge
Paper
feeding
direction
5mm
(max)
Length-direction
printable area
Bottom position