Epson Stylus Pro 3800 - Page 211

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
ADJUSTMENT Overview 211
PRINT HEAD
1Cleaning
√
---
P. 234
2 Head Rank ID
√
---
P. 223
3 Print Head Slant Adjustment (CR)
√
---
P. 226
4 PG Position Adjustment
√
---
P. 220
5 Print Head Slant Adjustment (PF)
√
---
P. 224
6 Auto Uni-D Adjustment
√ √
P. 252
7 Auto Bi-D Adjustment
√√
P. 253
8 Colorimetric Calibration Tool
√ √
P. 236
9 Print Image
√√
P. 265
10 Reset When Print Head Change
√
---
P. 268
PUMP, CAP ASSY. 1 Reset When Pump Motor Change √ ---
P. 268
BOARD ASSY.,
MAIN
[Backup OK]
1 Install F/W √ ---
P. 248
2 Parameter Backup √ ---
P. 231
3 RTC&USB ID √ ---
P. 222
Table 5-2. Required Adjustments in the Order of Execution (continued)
Part Name Required Adjustment
RP*
1
RM*
2
Page
BOARD ASSY.,
MAIN
[Backup NG]
1 Head Rank ID
√ ---
P. 223
2 RTC&USB ID √ ---
P. 222
3 Input Serial Number √ ---
P. 235
4 Initial Ink Charge Flag ON/OFF √ ---
P. 230
5 Install F/W √ ---
P. 248
6 Write Constant When CR change √ ---
P. 263
7 Print Head Slant Adjustment (CR) √ ---
P. 226
8 PG Position Adjustment √ ---
P. 220
9 Print Head Slant Adjustment (PF) √ ---
P. 224
10
Ink Mark Sensor Adjustment for Auto
Nozzle Check
√ ---
P. 249
11 Auto Uni-D Adjustment
√ ---
P. 253
12 Auto Bi-D Adjustment √ ---
P. 252
13 T&B&S Adjustment √ ---
P. 256
14 PF Adjustment
√
---
P. 258
15 EJ Adjustment
√
---
P. 260
16 Colorimetric Calibration Tool √ ---
P. 236
17 Print Image √ ---
P. 265
POROUS PAD,
TRAY, INK EJECT
1
Reset When Ink Holder Waste Absorber
Change
√
---
P. 268
POROUS PAD,
INK WASTE BOX,
RIGHT / POROUS
PAD, INK WASTE
BOX, LEFT
1 Reset When Borderless Absorber Change
√
---
P. 268
Table 5-2. Required Adjustments in the Order of Execution (continued)
Part Name Required Adjustment
RP*
1
RM*
2
Page