Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
ADJUSTMENT Overview 216
Sequential mode
By selecting a part you replaced or repaired, this mode guides you to perform all
the required adjustments in a predetermined sequence.
1. Highlight the part you replaced or repaired in the left box and click [Add].
2. Click [OK].
Figure 5-2. Sequential Mode
Individual mode
This mode allows you to select and perform an adjustment individually.
1. Highlight the target adjustment item and click [OK].
Figure 5-3. Individual Mode
To Next Page
Loading...
