Epson Stylus Pro 3800 - Page 25

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
PRODUCT DESCRIPTION Operation Panel 25
CUSTOM PAPER
PAPER NUMBER (1-10)
STANDARD
Paper type and relating settings can be saved and easily retrieved by assigning a number to them. Up to 10 groups of
settings can be stored. When EPSON genuine paper is used, STANDARD should be selected.
PAPER NO.1-10
PAPER TYPE
MATTE THICK
Selects a paper type corresponds to the paper.
MATTE THIN
PHOTO PLAIN
FINE ART PAPER
REMOTE PANEL PAPER
PLATEN GAP
NARROW
Adjusts the platen gap according to the selected paper type.
STANDARD
WIDE
WIDER
THICKNESS PATTERN PRINT
Prints a pattern to detect the thickness of loaded paper. (When STANDARD is selected in the PAPER NUMBER,
this menu is not displayed.)
PAPER FEED ADJUST A
0.00%
Sets paper feed amount for the printable area. The amount increases/decreases by the selected percentage of one
meter.
-0.7% to 0.7%
PAPER FEED ADJUST B
0.00%
Sets paper feed amount for the bottom area (out of the printable area). The amount increases/decreases by the
selected percentage of one meter.
-0.7% to 0.7%
DRYING TIME
0.0 SEC
Sets a time period to stop the print head movement for drying ink.
0.0 SEC to 10.0 SEC
MAINTENANCE
BLACK INK CHANGE EXECUTE Switches the black ink between Matte and Photo.
POWER CLEANING EXECUTE Performs a power cleaning.
CLOCK SETTING YY/MM/DD HH:MM Sets date and time of the internal clock.
CONTRAST ADJUSTMENT
0
Adjusts the contrast of the control panel display.
-20 - 0 - +20 (dec)
HEAD ALIGNMENT
AUTO
PREM.GLOSSY/LUSTER
Selects a paper type to be used for the gap adjustment.
PQ INK JET PAPER
ENHANCED MATTE PAPER
MANUAL
0.1 mm
Selects a gap to be adjusted manually.
0.2 mm
0.3 mm
0.4 mm
0.5 mm
Table 1-9. List of Menu Settings
Top Menu Menu Items Settings (Bold = default) Explanation