Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
MAINTENANCE Lubrication 277
[Lubrication 7] [Lubrication 8]
Part Name HOLDER, ROLLER, SUPPORT, R
(SHAFT, RELEASE, ASSY)
Lubrication Point On the HOLDER, ROLLER, SUPPORT, R with where the SHAFT,
RELEASE, ASSY. contacts
Lubricants G-26
Amount
φ2 mm x 2 mm x 3 points
Remarks Apply with a syringe. (Pin head:
φ2 mm)
HOLDER, ROLLER, SUPPORT, R
Lubrication
Point
Part Name FRAME, EJECT, ASSY.
Lubrication Point Left and right pivots of the
FRAME, EJECT, ASSY.
Left and right shafts for the torsion spring 0.046
Lubricants G-26
Amount 1.
φ2 mm x all around x each point
2. φ2 mm x 5 mm x each point
Remarks Apply with a syringe. (Pin head:
φ2 mm)
Right side
Lubrication Point 2
Lubrication Point 1
FRAME, EJECT, ASSY.
Left side
Lubrication Point 2
Lubrication Point 1
To Next Page
Loading...
