Epson Stylus Pro 3800 - Page 33

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
PRODUCT DESCRIPTION Operation Panel 33
44 No Paper Error --
PAPER ERROR
LOAD PAPER
Light Light Off
45 Paper Size Check Error Error --
PAPER SIZE ERROR
LOAD THE CORRECT SIZE
PAPER
Light Blink Off
46 Ink Mark Sensor Sensitivity Control Error Error --
PAPER SENSOR ERROR
PRESS THE BUTTON
LOAD DIFFERENT PAPER
Light Blink Off
47
Ink Mark Sensor Adjusted Value Error
Adjusted value cannot be set
Adjusted range over
Error --
PAPER_SENSOR_ERROR
PRESS THE BUTTON
LOAD THE CORRECT PAPER
Light Blink Off
48
Nozzle Check Error
Nozzle cannot be recovered
Error --
CLEANING ERROR
PRESS THE CANCEL/RESET
BUTTON
Light Blink Blink
49
Cleaning Error
W/ board paper
Before printing when PW inspection is OFF
Error
CLEANING_ERROR
PRESS THE
DOWN BUTTON
AND REMOVE
THICK PAPER
Light Light Off
50 During Initialization -- -- PLEASE WAIT Blink Off Off
51 During Sequence -- -- PLEASE WAIT Blink Off Off
52 Paper Initial Trigger Waiting Status (No waiting time) -- -- READY Light Off Off
53 Paper Initial Trigger Waiting Status (Auto loading) -- -- READY Light Off Off
54 Paper Setting Error Error --
PAPER SETTING ERROR
CHECK PAPER SOURCE_IN
THE DRIVER SETTINGS
AND LOAD PAPER
CORRECTLY
Light Light Off
55 Internal Pattern Printing -- -- PRINTING Blink Off Off
56 Setting Panel Error -- SETTING... Light Off Off
57 Initializing Paper -- -- PLEASE WAIT Light Off Off
58 Ink Drying -- --
INK_DRYING
NNNN_SEC
Blink Off Off
59 Maintenance Call Warning Warning --
MAINTENANCE_REQUEST
NNNN
Light Special Blink Off
60 Ink Low Warning Warning -- INK LOW Light Off Blink
No Error/Warning Status
Error or
Warning
Illustration
on LCD
Message on LCD
LED
Power Paper Status Ink Status