Epson Stylus Pro 3800 - Updating and Uninstalling the Printer Software

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
TROUBLE SHOOTING List of Panel Messages 65
Error
PAPER FEED ERROR
LOAD PAPER
CORRECTLY
PRESS THE
DOWN BUTTON
A multi-feed was detected and the
papers were ejected automatically
without printing.
p72
PAPER REMOVE
REMOVE PAPER
FROM THE REAR
Failed to eject paper fed from the
rear manual tray.
p72
PAPER ERROR
LOAD PAPER
No paper is detected.
p72
PAPER SIZE ERROR
LOAD THE CORRECT SIZE
PAPER
The size of loaded paper does not
match with the paper size setting. p72
PAPER SENSOR ERROR
PRESS THE BUTTON
LOAD DIFFERENT PAPER
The ink mark sensor sensitivity
adjustment could not be made. p72
PAPER SENSOR ERROR
PRESS THE BUTTON
LOAD THE CORRECT PAPER
Failed to determine the adjustment
value based on the result detected
by the ink mark sensor. (could not
determine, or the determined value
fell outside the adjustable range.)
p73
CLEANING ERROR
PRESS THE CANCEL/RESET
BUTTON
Clogging nozzles are detected by
the nozzle check after running a
head cleaning.
p73
CLEANING ERROR
PRESS THE
DOWN BUTTON
AND REMOVE
THICK PAPER
A head cleaning was attempted with
a board paper loaded, or before
printing when the PW sensor was
OFF.
p73
PAPER SETTING ERROR
CHECK PAPER SOURCE IN
THE DRIVER SETTINGS
AND LOAD PAPER
CORRECTLY
The paper has been loaded in the
tray that is different from the one
specified in the driver setting. p73
Table 3-1. List of Panel Messages
Category Message on LCD Description
Ref.
Page