Epson Stylus Pro 3850 - Removing the PAPER FEED MECHANISM

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 134
4.3.8 Removing the PAPER FEED MECHANISM
4.3.8.1 STACKER, ASSY.
DISASSEMBLY
1. Remove the HOUSING, FRONT, LEFT. (p98)
2. Remove the HOUSING, FRONT, RIGHT. (p99)
3. Open the STACKER, C.
4. Push outward on the left and right sides of the STACKER, C to widen it, and
remove the STACKER, C while disengaging the two guide pins of the STACKER,
ASSY.
Figure 4-56. Removing the STACKER, C
STACKER, ASSY.
STACKER, C