Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
ADJUSTMENT Standard Adjustment 258
5.3.20 PF Adjustment
Purpose
Checks and corrects the pitch of paper feeding during printing (except for printing
on the bottom area).
Paper Used
Size: A4/Letter
Type: Enhanced Matte Paper (US)/
Archival Matte Paper (Europe, Asia)
Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [PF Adjustment].
3. Click [Print] to print the adjustment pattern.
4. Examine the printout patterns, and select the value for the group of most
closely aligned patterns. (no gap but not overlapping each other).
5. Enter the numerical value found in Step 4 into the corresponding edit box.
6. Click [Write] and then click [Print] to print the adjustment pattern again.
7. Confirm the adjustment condition and if they are proper results, click [Finish].
If they are not, perform Step 4 to Step 6 again.
Figure 5-70. [PF Adjustment] Screen
Figure 5-71. Confirmation Point
C H E C K
P O I N T
The “E” next to the numbers show the current settings.
PF-Adjustment_02
OKNG NG
To Next Page
Loading...
