Epson Stylus Pro 3850 - 5.1.6 Tools for Adjustments

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
ADJUSTMENT Overview 214
5.1.6 Tools for Adjustments
The table below shows the tools required for adjusting the printer.
Note *: Since the adjustment program differs in Epson Stylus Pro 3800/3800C/3850 and
Epson Stylus Pro 3880/3885/3890, be careful not to use the wrong one.
Table 5-3. Tools for Adjustments
Type Name Part Number Remarks
Hard
Tool
Thickness Gauge T = 0.90 commercially
available
---
Thickness Gauge T = 1.00 commercially
available
---
Sonic Tension Meter U-507 1294120 ---
Code type microphone (U-505) 1277074 ---
Roller LD Height Adjustment Gauge
---
Individually
available upon
request
Roller LD Height Adjustment Tool
---
Individually
available upon
request
Roller LD Height Confirmation Standard
---
Individually
available upon
request
Enhanced Matte Paper (A4 or Letter)
Archival Matte Paper (A4 or Letter)
---
Genuine paper
Economy Super Fine Paper (A4) --- Genuine paper
Soft-
ware
Tool
Adjustment Program* --- Supplied
NVRAM Backup Utility --- Supplied
Colorimetric Calibration Tool --- Supplied