Epson Stylus Pro 3800/3800C/3850/3880/3885/3890 Revision C
ADJUSTMENT Standard Adjustment 237
5.3.11.2 Adjusting Method
TOOLS REQUIRED
ADJUSTMENT WORKFLOW
Following is the workflow of this adjustment.
Figure 5-38. Adjustment Workflow
Table 5-4. Tools Required
Tool Application/Specification
Plain Paper (A4) For nozzle check and printing surface protection
Plain Paper (A3) For alignment check
EPSON Enhanced (Archival) Matte
Paper (A4)
For printing charts
Computer Following drivers should be installed beforehand.
Printer driver for this product
USB driver for the calibrator
GretagMacbeth eye-one (i1)
(Calibrator)
With UV filter
Calibration base plate (White plate) Accessory provided with the calibrator
Scanning ruler (Scale) Accessory provided with the calibrator
USB cable To connect the computer and the calibrator
Black sheet Should be larger than A4
To Next Page
Loading...
