H
Close the cover.
Push in the cover until you hear the upper
portion click into place.
I
Return the front cover.
Re-insert the four screws that hold the cover in
place and use a cross-head screwdriver to tighten
them down. The shape of the screws differ for the
top and the front. Use the screws that come with a
washer for the front section (the cartridge cover
section).
If you are using the optional SpectroProofer,
install the SpectroProofer into place without
returning the front cover.
Note:
If the front cover is not properly in place, an error
occurs and the printer does not respond.
J
Close the printer cover and the left and right
cartridge covers.
Epson Stylus Pro 4900/4910 User's Guide
Maintenance
126
To Next Page
Loading...
