Epson Stylus Pro 7000 - Disassembly Flow

EPSON Stylus Pro 7000 Revision B
Disassembly & Assembly Disassembly Flow 112
4.2 Disassembly Flow
Refer to the following flowchart when determining the disassembly flow.
Figure 4-2. Disassembly Process Flowchart
4.2.1 Remove Panel &
Housing
4.2.2 Remove Circuit Board
Panel Unit
L/R Side Covers
H Top Cover
Front Cover
Roll Cover
Lower Paper Guide
Rear Panel
Power Supply Board
C299MAIN Board
4.2.3 Disassemble Printer Mechanism
Replace Waste Ink Pads
Replace Printheads
CR Motor / Pulley Assembly
PF Motor / Pulley Assembly
Maintenance Assembly
Sensors
4.2.4 Disassemble Ink System Mechanism