EPSON Stylus Pro 7000 Revision B
Product Description Features 16
CUT SHEET SPECIFICATIONS
Minimum-quality paper
Paper meeting the requirements described below can be used with this
printer, but neither the feeding nor printout quality is guaranteed.
Size = see the following table
Thickness = 0.08~1.5mm (for 297~728mm/ 11.8~29.0” length paper
(0.003~0.06”)
0.08~0.5mm (for 728~915mm/ 29.0~36.4” length paper)
(0.003~0.02”)
Plain paper
For paper meeting the following requirements, only the feeding operation
is guaranteed.
•Size = see Table 1-5 above (plus the following requirements)
•Thickness = 0.08~0.11mm (0.003~0.0044”)
•Weight = 64~90gf/m
2
(17~24 lb.s)
•Quality: Normal, recycled paper
*1: Load short edge first (portrait)
*2: Use at normal room temperature (15~25°C (59~77°F) 40~60%
humidity)
EPSON Special Paper
The following special papers meet or exceed EPSON requirements, and
paper feeding plus printout quality are assured.
•Size = see the following table
Table note:
*1: Print quality optimized with uni-direction printing
CAUTION
Paper must have no wrinkles, tears, or folds plus the surface
should be smooth
Paper must be fed short-edge first (portrait)
Use at normal room temperature (15~25°C (59~77°F)
40~60% humidity)
Table 1-5. Supported Cut-Sheet Paper
Size Dimensions (W x H)
B2 515 x 728mm
A1+ 24 x 36”
A1 594 x 841mm
A2 420 x 594mm
A3+ 329 x 483mm
A3 297 x 420mm
A4 210 x 297mm
ANSI D 22 x 34”
ANSI C 17 x 22”
ANSI B 11 x 17”
Letter 8.5 x 11”
Table 1-6. Cut-Sheet Availability
Size
Dimensions
(W x H)
SuperFine
*1
PhotoPrint
Photo Quality
Glossy Film
Art
Board
A4 210 x 297mm Yes Yes Yes -
A3 297 x 420mm Yes Yes Yes -
A3+ 329 x 483mm Yes Yes Yes -
A2 420 x 594mm Yes - - -
Letter 216 x 279mm Yes Yes Yes -
B 279 x 432mm Yes Yes Yes -
C 431 x 558mm Yes - - -
B2 515 x 728mm - - - Yes
To Next Page
Loading...
