Epson Stylus Pro 7000 - Maintenance and Diagnostic Modes; Maintenance Mode

EPSON Stylus Pro 7000 Revision B
Product Description Service Requests 49
1.8.1 Maintenance And Diagnostic Modes
When the printer is not functioning properly, there are three modes that help
you detect what is wrong and can help you fix the problem. These modes are
“Maintenance Mode”, “Maintenance Mode 2”, and “Self-Diagnostic Mode”.
To enter a mode, press and hold down the appropriate button (described
below) while turning on the printer.
For details on how to make settings, see “SelecType Settings” on page 40. To
exit a mode, turn the printer off and on again.
MAINTENANCE MODE
To enter: While pressing the Pause button, turn the printer on.
CAUTION
The following explanations regarding control panel service
functions are for service and support purposes only; do not
share this information with the user.
Table 1-39. Maintenance Mode
Message Item Explanation
Hex Dump Print
Prints the print data in hexadecimal
form, allowing you to confirm whether
the print data from the host PC is
properly sent/received. Press the Pause
key to stop printing and turn off the
printer to exit.
Language
English, French,
Italian, German,
Spanish,
Portuguese
Determines which language is used to
display messages on the LCD display.