Epson Stylus Pro 7000 - Backup;Download Error Recovery; Range of Backed up Parameters

EPSON Stylus Pro 7000 Revision B
Adjustment Adjustment Steps 161
BACKUP/DOWNLOAD ERROR RECOVERY
If an error occurs during the backup or download procedure, the following
message appears on the LCD.
If you see the message above, one of the following errors has occurred.

Flash memory/ write error

Flash memory/ erase error

PC card/ write error

PC card/ erase error
Using a different PC card, try the operation again. If a different PC card does
not solve the problem, there is a problem with the flash memory on the Main
Board and a backup is not possible. Replace the Main Board
RANGE OF BACKED UP PARAMETERS
The following parameters on the C299 Main Board are backed up during the
back up operation.
Flash ROM addresses 000~5FF (except for 120~13F)

Head Rank

Bi-D

Head Gap

Flushing Point (R)

Feed correction

P_REAR sensor position

Capping position

Adj Top/Bottom
End [Error]