EPSON Stylus Pro 7000 Revision B
Product Description Control Panel 35
LED INDICATORS
Note: *Also occurs if no cartridge is installed or the wrong cartridge is installed.
Table 1-23. LED Indicator Lights
LED Status Condition
Operate
•On
•Flashing
• Power on
• Receiving data or performing power-down
sequence
Paper Out
•On
•Flashing
• No paper loaded, end of roll, sheet/roll paper
error, paper set lever is in release position, or
the loaded paper is too thick for cleaning
• Paper jam, paper cutting, paper skew, or paper
check error
Pause
•On
•Flashing
•Paused
• Performing head cleaning or the printer is in
ink drying phase. Also flashes during ink
charging operation.
Ink Out Y
•On
•Flashing
• Ink out*
• Ink low
Ink Out LM
•On
•Flashing
• Ink out*
• Ink low
Ink Out LC
•On
•Flashing
• Ink out*
• Ink low
Ink Out M
•On
•Flashing
• Ink out*
• Ink low
Ink Out C
•On
•Flashing
• Ink out*
• Ink low
Ink Out K
•On
•Flashing
• Ink out*
• Ink low
Roll Auto Cut
•On
•Flashing
• Auto cut selected
• Roll paper not set or roll paper and cut sheet
sizes are different
Paper Type
(Cut Off)
•On
•Flashing
• Roll paper will not be cut
• Roll paper not set or roll paper and cut sheet
sizes are different
Sheet
•On
•Flashing
• Single sheet printing mode.
• Roll paper not set or roll paper and cut sheet
sizes are different
To Next Page
Loading...
