Epson Stylus Pro 7000 - Page 182

EPSON Stylus Pro 7000 Revision B
Adjustment Self-Diagnostic Mode Menus 182
7. Select “Print Adj Pattern” with the SelecType or Item button, and print the
pattern again to make sure the heads are lined up. Adjust again if
necessary. If there is no slant, press Enter.
Figure 5-24. Head Parallelism Check Operation
Printing Pattern
Check the pattern for offset lines or
segments and change the adjust
lever position if necessary.
BC Slant Check End
Print Adj. Pattern
[Enter]
[SelecType]/[Item]
End
adjustment/
next menu