Variety of Printings 21
Mac OS X Leopard Printer Driver Guide
Borderless Printing
You can print your data without margins on
paper. There are two types of borderless printing.
❏ Auto Expand
Enlarge the size of print data automatically
and print without margins. Enlarged areas
that exceed the paper size will not be printed
on the paper.
❏ Retain Size
Using an application, enlarge your image data
to exceed the paper width and height, to avoid
unprinted areas appearing along the left and
right edges. The printer driver does not
enlarge the image data. Enlarge 3 mm in both
the left and right directions (total of 6 mm) is
recommended by using the application that
created the data.
Select this setting if you do not want to change
the ratio of your print data by the printer
driver.
Supported media type
See the same section in User's Guide for the details.
Application settings
Set the size of the image data using the Page
Setting dialog box of the application software.
For Auto Expand
❏ Set the same paper size as used for printing.
❏ If your application has margin settings, set the
margin to 0 mm.
❏ Make the image data as large as the paper
size.
Note:
If you are using roll paper, all four sides can be
borderless, and if you are using a sheet of paper, only
left and right sides can be borderless.
To Next Page
Loading...
Need help?
General
