Epson Stylus Pro Series - Printer Driver Settings for Borderless Printing

Variety of Printings 22
Mac OS X Leopard Printer Driver Guide
For Retain Size
❏ Enlarge 3 mm in both the left and right
directions (total of 6 mm), using the
application that created the data.
❏ If your application has margin settings, set the
margin to 0 mm.
❏ Make the image data as large as the paper
size.
Printer driver settings
To print your data with this feature, follow the
steps below.
A
Open the Page Setup dialog.
See “Accessing the Printer Driver” on
page 6.
B
Select the paper size and borderless
printing such as Auto Expand or Retain
Size, and then click OK.
C
Open the Print dialog.
See “Accessing the Printer Driver” on
page 6.
D
If Auto Expand is selected, set the amount
of the enlargement in the Page Layout
Settings dialog.
E
In the Print Settings dialog, select the media
type.
F
If you print on roll paper, select the Auto
Cut setting in the Page Layout Settings.
See “Roll paper cut for borderless
printing” on page 23.
G
Check the other settings, and then start
printing.
Note:
Moving the slider towards Min decreases the
amount of the image enlargement; however, as
this amount decreases, margins may appear on
one or more sides of the paper.