Variety of Printings 25
Mac OS X Leopard Printer Driver Guide
Pages Per Sheet Printing
You can print two or four pages of your
document on one sheet of paper.
If you print continuous layout data prepared at
A4 size, it will be printed as shown below.
A
Open the Print dialog.
See “Accessing the Printer Driver” on
page 6.
B
Select a target printer, and then select
Layout from the list to specify the order in
which the pages will be printed.
C
Check the other settings, and then start
printing.
Printing on Custom
Paper
You can also print on a custom paper, using the
steps below.
✽ The maximum length of the paper roll can be
longer than the paper height if using application
software that supports banner printing. However,
the actual print size is dependent on the
application, the paper size set in the printer, or the
computer environment.
A
Open the Page Setup dialog.
See “Accessing the Printer Driver” on
page 6.
B
Select Manage Custom Sizes in Paper Size.
Note:
Use the standard feature of the operating system for
layout printing.
Note:
If you select other than None for Border, the
frames around the pages are printed on each
sheet.
Note:
❏ You can set a larger size in the Custom Paper
Size than the size that you can set in the printer;
however, it does not print correctly.
❏ The available output size may be limited
depending on the application software.
To Next Page
Loading...
Need help?
General
