Description Selects page n from the character code table.
Default n = 0
Reference
APPENDIX E Character Code Tables
ESC u n
Name
Format
Range
Description
Notes
Transmit peripheral device status
< 1B >
H
< 75 >
H
< n >
n 0
=
Transmits the status of connector pin n.
• n is specified as follows:
n Connector Pin
0
Drawer-kick out connector Pin 3
• The status ‘to be transmitted is as shown below. Bit 4 of
the data is always 0.
values
Bit
Function
0
1
0
Pin #3 level “L”
“H”
1
Undefined
2
Undefined
3
Undefined
4
Unused
Fixed to 0 -
5
Undefined
6
Undefined
7
Undefined
• When DTR/DSR control is selected, one byte is transmitted
after confirming that the host computer is ready to receive
data (DSR signal is SPACE). When XON/XOFF control is
selected, one byte is transmitted without checking the DSR
signal status.
. Note that it may take some time to transmit the status after
receiving the command.
APPENDIX B Connectors
Reference
-36-
To Next Page
Loading...
