Epson TM-J7200 - Page 101

101
Appendix
Character size
Standard/Double-height/Double-width/Quadruple W × H
Font A
(40 × 80)
1.69 × 3.38 mm {0.067 × 0.133”}/1.69 × 6.77 mm {0.067 × 0.267”}/3.38 × 3.38 mm {0.133 × 0.133”}
/3.38 × 6.77 mm {0.133 × 0.267”}
Font B
(30 × 56)
1.27 x 2.40 mm {0.05 × 0.094”}/1.27 x 4.80 mm {0.05 × 0.189”}/2.54 x 2.40 mm {0.10 × 0.094”}
/2.54 x 4.80 mm {0.10 × 0.189”}
Font A
(37 × 80)
1.55 × 3.38 mm {0.061 × 0.133”}/1.55 × 6.77 mm {0.061 × 0.267”}/3.10 × 3.38 mm {0.122 × 0.189”}
/3.10 × 6.77 mm {0.122 × 0.267”}
Font B
(27 × 56)
1.13 × 2.40mm {0.044 × 0.094”}/1.13 × 4.80mm {0.044 × 0.189”}/2.26 × 2.40mm {0.089 × 0.094”}
/2.26 × 4.80mm {0.089 × 0.189”}
Special Font A
(50 × 80)
2.12 × 3.38mm {0.083 × 0.133”}
 This chart includes the spaces inside the character font, and so the actual characters are smaller
than the Table above.
 Characters can be scaled up to 64 times as large as the standard sizes above.
 The following describes the standard character dimensions not including the horizontal space.
Font A: 1.41 (W) × 3.384 (H) mm {0.056 × 0.133”}
Font B: 0.987 (W) × 2.397 (H) mm {0.039 × 0.094”}