107
Appendix
Printing and Cutting Positions
Autocutting operation is enabled with roll paper only.
Electrical Characteristics
The values above may vary slightly as a result of paper slack or variations in the paper. Take this
into account when setting the cutting position of the autocutter.
Operating voltage DC 24V ± 7 %
Current consumption
(24V, 25°C, standard print density)
Average: Approx. 1.8 A
22 mm {0.87“}
Paper feed
direction
One point left uncut
on the right side
Autocutting position
Printing area
To Next Page
Loading...
