Epson TM-J7200 - Setting;Check Modes

47
Chapter 3 Advanced Usage
3
Setting/Check Modes
As well as print mode, the following modes are also provided for making various printer settings and checking
items.
 Self-test mode
 NV graphics information print mode
 Customize Value settings mode
 Ethernet setup mode
 Hexadecimal dumping mode
The self-test mode or hexadecimal dumping mode is selected depending on the operation performed when the
power is turned on.
NV graphic information print mode, and Customize Value settings mode are selected depending on the Feed
button operation performed during a self-test.
Self-test
Briey press the Feed button. Hold down the Feed button.
Press the Feed button
once briey and then
hold it down.
Open the Roll paper cover, and turn on the printer while pressing the Feed
button, and then close the Roll paper cover.
Continue the self-test
Mode selection guidance
NV Graphics
Information
Hexadecimal dumping
Press the Feed button
twice briey and then
hold it down.
Customize Value
Setting
Press the Feed button
three times briey and
then hold it down.
Ethernet Setup
Close the Front cover/ Roll paper cover, and turn on the printer while pressing the Feed button.