Epson TM-J7200 - Configuration Menu

60
Configuration Menu
On the Configuration menu, you can check and set the following items.
Ethernet
You can check and set the communication standard.
(Auto / 10Base-T Half Duplex / 10Base-T Full Duplex / 100Base-Tx Half Duplex / 100Base-Tx Full Duplex)
Security
SSL/TLS
You can check and set the SSL/TLS.
 Selection of the server certificate type
(Self-Signed Certificate / CA-Signed Certificate1 / CA-Signed Certificate2 / CA-Signed Certificate3)
 Encryption strength setting (Medium / Low / High)
 Setting for automatic redirect from HTTP to HTTPS (Enable / Disable)
 Confirmation of each certificate
Authentication
Certificate List
You can check the following items for certificates.
 Self-Signed Certificate setting
 CA-Signed Certificate settings 1 to 3
 CA Certificate settings 1 to 10
Certificate Import
You can check and set the following items for certificate imports.
 File format settings (PEM/DER Certificate / Password Protected PKCS#12 Certificate)
 File name input
 Password input
* If you import and select an invalid certificate, you will no longer be able to start up EpsonNet Config (Web
version).
In that case, use TM-J7200 TM-J7700 Utility to select a certificate other than the invalid one (for example, a
Selfsigned Certificate), and import the correct certificate with EpsonNet Config (Web version) again.