Epson TM-J7200 - Page 61

61
Chapter 3 Advanced Usage
3
TCP/IP
IP v4 Address
This sets the IP address when setting the manual.
 Setting for IP address acquisition method (Manual / Auto)
 IP address setting
 Subnet mask address setting
 Default gateway address setting
 APIPA setting (Enable / Disable)
 ARP+Ping setting (Enable / Disable)
DNS/DDNS
This sets the DNS server address (IPv4).
 Setting for automatic acquisition of the DNS server address (Disable / Enable)
 DNS server address setting
This sets the host name and domain name.
 Setting for automatic acquisition of the host name and domain name (Disable / Enable)
 Host name input
 Domain name input
 Setting of the function for registering the network I/F address in the DNS server (Disable / Enable)
SNMP
Community
This sets the community name used in notifications. You can set up to 16 ASCII characters.
 Read Only community name fixed as "public" * Cannot be changed
 Read/Write community name input
IP Trap
This sets the IP trap.
IP Trap1
 Trap setting (Disable / Enable)
 Trap address setting
 Community name input
IP Trap2
 Trap setting (Disable / Enable)
 Trap address setting
 Community name input