62
Bonjour
This sets Bonjour.
Bonjour setting (Disable / Enable)
Name input for when using Bonjour *
Printer name setting for when using Bonjour *
Installation location input
* You can use upper and lower case alphabet characters, numerals and hyphens, however, only use upper and
lower case alphabet characters for the initial character.
Time Setting
You can check and set the time server.
Use of time server (Disable / Enable)
Time server address setting
Time setting for refresh interval (Can be set between 1 min to 10,080 min) - Default is 60 min.
Time difference settings
Timeout
This sets the timeout time for printing.
LPR time-out setting - Default is 90 sec.
RAW (Port9100) time-out setting - Default is 90 sec.
Certificate Import
Make the following settings in the Authentication - Certificate Import menu.
1
Set the file type of certificate.
2
Specify the certificate file to import.
3
If the file type of certificate is PKCS#12, enter the password.
4
Click [Import].
Enable the time server when using a certificate.
To Next Page
Loading...
