Rev.B General Specifications Appendix A-1
TM-L90 Service Manual
Confidential
Appendix A
General Specifications
Printing Specifications
Paper Specifications
Printing method: Thermal line printing
Dot density: 203 dpi × 203 dpi [dpi: dots per 25.4 mm (dots per inch)]
Paper type: Specified thermal roll paper
The following paper can be used:
• Receipt paper (without black mark)
• Receipt paper (with black mark)
• Label paper (without black mark)
• Label paper (with black mark)
Refer to page 6-13 “Paper Layout Automatic setting mode“
Form: Paper roll
Paper width: 79.5
±
0.5 mm {3.13 ± 0.02"} (for 80 mm {3.15"} paper width)
59.5
±
0.5 mm {2.34 ± 0.02"} (for 60 mm {2.36"} paper width)
37.5
±
0.5 mm {1.48 ± 0.02"} (for 38 mm {1.5"} paper width)
To Next Page
Loading...
Need help?
General
