Epson TM-L90 series - Related Documentation

viii Rev.B
Confidential
Related Documentation
Documents related to the TM-L90 are listed below.
Documentation
*1)TM Service & Support utility is to use for repairing the TM printer. The utility has the
function below.
• It uses for repair of the TM-L90 and adjustment.
The repairment means to change the print head, autocutter, main circuit board unit etc.
• Communication test, self-test, and test print can be performed.
• Setting for the memory switch or customized value can be performed.
• The error history information saved on the memory that a printer has when a printer
is repaired can be reffered to.
• It can check that sensors are operating by using the demand of real-time status.
• Sequence peculiar to a printer, such as a paper layout setting, can be performed.
• The newest firmware released can be written in memeory that a printer has.
• It is released and multilingual fonts can be written in the memory that a printer has
corresponding to multilingual.
• If a repair wizard is used, it can be made to complete by operating a series of work which
is needed for part exchange according to a screen.
If you have any questions, please contact SD-Technical Support.
Mail Address: Sd.techsupt@exc.epson.co.jp
Related Documents
Name of document Description
TM Service & Support Utility User’s
Manual *1)
This manual is written for the person that repairs or adjusts of the TM-L90.
TM-L90 User’s Guide This manual is written for the operator of the TM-L90.
TM-L90 Developer’s Guide. This manual is written for users who are designing TM-L90.