Epson TM-L90 series - Page 50

Rev.C Disassembly and Assembly 3-29
TM-L90 Service Manual
Confidential
5. Lubricate half of reduction gear C with G-45.
6. Lubricate the contact area of frame R and the front frame with G-36.
7. Lubricate the contact area of the frame L assembly and the front frame with G-36.
8. Lubricate the contact area of the right side of the center frame and the circuit board frame
with G-36.
9. Lubricate the right side of the center frame and the groove in frame R with G-36.
frame
Frame R
Circuit
Frame L assembly
frame
Frame R
Center
board
Front
frame