Epson TM-T20II

Chapter 2 Setup
51
2
Barcode height reduction rate
•Not reduced (initial setting)
•25%
•50%
•75%
Font A auto replacement
•Does not replace (initial setting)
•Font B
Font B auto replacement
•Does not replace (initial setting)
•Font A
Optional buzzer
Enables/disables
•Disabled (initial setting)
•Enabled
Buzzer frequency (Error)
•Does not sound
•Sounds 1 time
•Sounds continuously (initial setting)
Sound pattern (Autocut)
Selectable from Patterns A to E
Initial setting: Pattern A
This function is enabled only when Number of columns is set to Standard mode.
This function is enabled only when Number of columns is set to Standard mode.
 For information about how to connect the optional external buzzer, see "Connecting the
Optional External Buzzer" on page 55.
 When the optional external buzzer is enabled, a cash drawer cannot be used. Be sure to
disable it when you use a cash drawer.