Chapter 2 Setup
53
2
Parity
•None (initial setting)
•Even
•Odd
Data bit
•7 bits
•8 bits (initial setting)
Flow control
•DTR/DSR (initial setting)
• XON/XOFF
Communication condition of USB interface
•USB printer class (initial setting)
• USB vendor-defined class
Auto top logo
Key-code
Selectable from key-codes of registered logos
Alignment
•Left
•Center
•Right
Number of lines to be deleted below top logo
If set to 7 bits, printing from a printer driver is not possible.
TM-T20II Utility does not support the function for Number of lines to be deleted below top
logo.
To Next Page
Loading...
