Chapter 1 Product Overview
13
1
Parts Name and Function
Power Switch
Turns the printer on or off. The marks on the switch: ( / )
CAUTION
Before turning on the printer, be sure to check that the AC adapter is connected to
the power supply.
Before turning the printer off, it is recommended to send a power-off command to the
printer. If you use the power-off sequence, the latest maintenance counter values are
saved. (Maintenance counter values are usually saved every two minutes.)
For detailed information about ESC/POS commands, see the ESC/POS Application
Programing Guide.
Manual cutter
Roll paper cover
Power switch cover
Cover open lever
Control panel
Power switch
To Next Page
Loading...
