Epson TM T70 Technical Reference Guide

36
Selecting the Print Density (DIP Switch 2-3/2-4)
Function SW 2-3 SW2-4
Low power consumption mode ON ON
Print density (Standard) OFF OFF
Print density (Darker than standard) ON OFF
Print density (Dark) OFF ON
• If the print density is set to “Darker than standard” or ”Dark” level, printing speed may be
reduced.
• The print density can be set with DIP switches (2-3/2-4) or the customized value. (See
"Setting the Memory Switches" on page 38.) The initial setting of the customized value is
“Depends on the DIP switch settings.” If the customized value is changed, the value set
with the customized value is enabled.

Epson TM T70 Specifications

General

Resolution	180 dpi
Auto Cutter	Yes
Print Method	Thermal line
Paper Width	79.5 ±0.5 mm
Interface	USB, Ethernet
Power Supply	AC adapter