Epson TM T70 Technical Reference Guide

34
DIP Switch Bank 2
SW Function ON OFF
Factory
setting
2-1 Handshaking (BUSY condition) Receive buffer full
• Offline
• Receive buffer full
OFF
2-2
Reserved (Do not change
settings)
Fixed to OFF OFF
2-3 ∼
2-4
Selects print density/Low
power consumption mode
See "Selecting the Print Density (DIP Switch
2-3/2-4)" on page 36.
OFF
2-5 Reserved — — OFF
2-6
Reserved (Do not change
settings)
Fixed to OFF OFF
2-7 I/F pin 6 reset signal Enabled Disabled OFF
2-8 IF pin 25 reset signal Enabled Disabled OFF
• For DIP switch 2-1 (BUSY condition), see also "Selecting the BUSY Status" on page 37.
• Do not change the setting of DIP switches 2-2 and 2-6. Otherwise, the printer may not
operate normally.

Epson TM T70 Specifications

General

Resolution	180 dpi
Auto Cutter	Yes
Print Method	Thermal line
Paper Width	79.5 ±0.5 mm
Interface	USB, Ethernet
Power Supply	AC adapter