Epson TM T70 Technical Reference Guide

40
Connecting the serial interface (RS-232C) cable
1
Insert the interface cable connector firmly into the interface connector
on the connector panel.
2
When using connectors equipped with screws, tighten them to secure
the connectors firmly.
3
When using interface cables equipped with a grounding line, attach the
ground line to the screw hole marked “FG” on the printer.
4
Connect the other end of the interface cable to the host computer.
WARNING
Be sure to turn off the power supply for both the printer and host computer before
connecting the cables.
DK
24V
FG FG
Interface connector
Drawer kick-out connector
Power supply connector

Epson TM T70 Specifications

General

Resolution	180 dpi
Auto Cutter	Yes
Print Method	Thermal line
Paper Width	79.5 ±0.5 mm
Interface	USB, Ethernet
Power Supply	AC adapter