Epson TM-T88

3-14
GS < Initialize printer
mechanism
Feeds a label to the
print starting position.
●
GS A Adjust label
position to start
printing
Adjusts the label
position relative to the
default position.
●
GS B Turn white/black
reverse printing
mode on/off
Turns white/black
reverse printing mode
on or off.
●●● ●
GS C 0 Select counter
print mode
Selects a print mode for
the serial counter.
●
GS C 1 Select count
mode (A)
Selects a count mode
for the serial counter.
●
GS C 2 Set counter Sets the serial counter
value.
●
GS C ; Select count
mode (B)
Selects a count mode
for the serial counter
and specifies the
counter value.
●
GS E Select head
control method
Selects the print speed
and head energizing
time.
●●●● ●
●
●
GS H Select printing
position of HRI
characters
Selects the printing
position of HRI
characters when
printing a bar code.
●●●
●
GS I Transmit printer ID Transmits a specified
printer ID.
●●● ●●
●
●●
●
●
GS L Set left margin Sets the left margin
using specified values.
●●● ● ●
GS P Set horizontal and
vertical motion
units
Sets the horizontal and
vertical motion units.
●●●
●
●●
●
Command Name Function
Supported Command
TM-
T85
TM-
T88/
T88M
TM-
L60II
TM-300/300M TM-U200 TM-
U375/
U375M
TM-
H5000/
H5000M
TM-
U925
TM-
U950/
U950M
TM-
295
TM-
215S
ABCDB D
The commands supported by each printer are marked by a
● or a O. The functions of the commands marked by a O may differ, depending on the printer model.