Epson TM-T88

3-15
TM–T88/T88P (TM–T85/T85P) Information Manual
GS V Select cut mode
and cut paper
Cuts the specified
paper.
●● ● ●
GS V Select cut mode
and cut paper
Advances the specified
paper to the cut
position and performs
the cut.
●● ●● ●
GS W Set printing area
width
Sets the printing area
width to a defined area.
●●● ● ●
GS \ Set relative
vertical print
position in page
mode
Moves the vertical print
starting position in page
mode to a specified
distance from the
current position.
●●● ●
GS ^ Execute macro Executes a macro.
●●●
●
GS a Enable/disable
Automatic Status
Back (ASB)
Selects a status for ASB
transmission.
●●● ●● ●
●
●●
●
GS b Turn smoothing
mode on/off
Turns smoothing mode
on or off.
●●● ●
GS c Print counter Stores a serial counter
value in the print buffer
and increments or
decrements the counter
value.
●
GS f Select font
for HRI characters
Selects a font for the HRI
characters used when
printing a bar code.
●●●
●
GS h Set bar code
height
Sets the height of a bar
code.
●●●
●
Command Name Function
Supported Command
TM-
T85
TM-
T88/
T88M
TM-
L60II
TM-300/300M TM-U200 TM-
U375/
U375M
TM-
H5000/
H5000M
TM-
U925
TM-
U950/
U950M
TM-
295
TM-
215S
ABCDB D
The commands supported by each printer are marked by a
● or a O. The functions of the commands marked by a O may differ, depending on the printer model.