2 TM-U220II User’s Manual
English
Important Safety Information
This section presents important information intended to ensure safe and
effective use of this product. Read this section carefully and store it in an
accessible location.
The symbols in this manual are identified by their level of importance, as
defined below. Read the following carefully before handling the product.
WARNING:
Warnings must be followed carefully to avoid serious bodily injury.
CAUTION:
Cautions must be observed to avoid minor injury to yourself or damage to your equipment.
Safety Precautions
WARNING:
Shut down your equipment immediately if it produces smoke, a strange odor, or unusual
noise. Continued use may lead to fire. Immediately unplug the equipment and contact
qualified service personnel.
Never attempt to repair this product yourself. Improper repair work can be dangerous.
Never disassemble or modify this product. Tampering with this product may result in injury
or fire.
Be sure to use the specified power source. Connection to an improper power source may
cause fire.
Only use the AC power cord provided. Do not use the AC power cord provided with another
equipment.
Do not use this product with any voltage other than the specified one. Doing so may lead to
fire or electric shock.
Be sure your AC power cord meets relevant safety standards of the area where you plan to
use it.
Do not allow foreign matter to fall into the equipment. Penetration by foreign objects may
lead to fire.
If water or other liquid spills into this equipment, do not continue to use it. Continued use
may lead to fire. Unplug the power cord immediately and contact qualified service
personnel.
Do not use aerosol sprayers containing flammable gas inside or around this product. Doing
so may cause fire.
CAUTION:
Do not connect cables in ways other than indicated in the manuals. Different connections
may cause equipment damage and burning.
Be sure to set this equipment on a firm, stable, horizontal surface. Product may break or
cause injury if it falls.
Do not use in locations subject to high humidity or dust levels. Excessive humidity and dust
may cause equipment damage or fire.