Epson TM-U220II - TM-U220 II Specifications

TM-U220II User’s Manual 21
English
TM-U220II Specifications
dpi: dots per 25.4 mm (dots per inch); lps: lines per second; lpi: lines per 25.4 mm (lines per inch)
*1: The interface provided varies by model.
Printing method 9-pin serial impact dot matrix method
Print font Font (standard) Font A: 7 × 9, Font B: 9 × 9
Column capacity
(columns)
7 × 9/9 × 9:
76 mm: 40/33
69.5 mm: 36/30
57.5 mm: 30/25
Character size (W  H)
(standard)
1.2 × 3.1 mm/1.6 × 3.1 mm (not including horizontal spacing)
Character set 95 Alphanumeric, 48 International,128 × 12 Graphic
Characters per inch
(standard)
(3 half dot spacing)
Font A (7 × 9): 16 cpi, Font B (9 × 9): 13.3 cpi
Paper Dimensions (mm) 57.50.5, 69.50.5,
760.5
Normal paper (mm) Thickness:
0.06–0.085 (1 sheet)
Pressure-sensetive paper Thickness: 0.05–0.08 (1 sheet), total thickness must be 0.14 mm
or less.
Number of copies: Original 1 sheet + one copy sheet
Ribbon cassettes ERC-38 (B) Black life: 3,000,000 characters
ERC-38 (B/R) Black/Red life: Black 1,500,000/Red 750,000
characters
Life based on continuous printing at 25°C {77°F}
Printing speed (Paper width 76 mm) 4.7 lps (40 columns, 16 cpi)
Interface
*1
USB-B USB 2.0 Full-speed (12 Mbps)
Wired LAN 10BASE-T/100BASE-TX
Serial RS-232
Parallel IEEE1284
Receive buffer
*2
20 KB or 40 bytes
4 KB or 40 bytes
Power supply
*3
24 VDC7%
Current consumption (at 24 V)
1.3 A
AC power
consumption
*4
Operating
24.7 W
Storage
1.2 W
Cash drawer function 2drives
Temperature Operating 0–50°C
Storage –10–50°C, without paper and ribbon cassette
Humidity Operating 10–90%, must be no condensation
Storage 10–90%, must be no condensation, without paper and ribbon
cassette
Elevation 3,000 m or less
Overall dimensions (mm) Type A: 160 × 286 × 157.5 (W × D × H)
Type B: 160 × 248 × 138.5 (W × D × H)
Type D: 160 × 248 × 138.5 (W × D × H)
Mass (approx.) Type A: 2.7 kg Type B: 2.5 kg Type D: 2.3 kg