TM-U220II User’s Manual 3
English
Do not place heavy objects on top of this product. Never stand or lean on this product.
Equipment may fall or collapse, causing breakage and possible injury.
Take care not to injure your fingers on the manual cutter
• When you remove printed paper
• When you perform other operations such as loading/replacing roll paper
To ensure safety, unplug this product before leaving it unused for an extended period.
Before moving the product, unplug it and unplug all cables connected to it.
Safety Label
CAUTION:
During printing or after printing, the print head can be very hot. Touching it may cause
burns.
Notes on Usage
❏ Do not open the cover during printing or when the autocutter is being
operated.
❏ Do not install the printer in a dusty place.
❏ Protect the printer from impact.
❏ Cords or other foreign objects must not be caught on the printer.
❏ Do not apply excessive force to the printer case.
❏ Do not place food or beverages such as coffee on the case of the
printer.
Notes on Installation
❏ When using the printer, be sure that the printer is installed
horizontally.
❏ If you are using a Type B or D printer, you can hang it on a wall, using
the optional hanging bracket set, WH-10.
Note:
To hang the printer on a wall, see the WH-10 Installation Manual for
detailed instructions.
The caution labels on the product indicate the following precautions.
To Next Page
Loading...
Need help?
General