6 TM-U220II User’s Manual
English
Power Supply Switch and Power Supply Switch Cover
The power supply switch is on the front of the printer. Press the power
supply switch to turn on the printer.
Power Supply Switch Cover
You can use the enclosed power supply switch cover to make sure that the
power supply switch is not accidentally pressed. Just press the cover into
place to install it. If you need to turn the power supply switch on or off with
the cover attached, you can insert a thin tool into one of the holes in the
cover to operate the switch.
WARNING:
If an accident occurs when the power supply switch cover is attached, immediately unplug
the power supply cable to avoid fire.
If you are going to store the printer or leave it unused for a long time, turn
it off using the power supply switch on the printer.
Inserting and Replacing the Ribbon Cassette
CAUTION:
The print head becomes very hot during printing. Touching it may cause burns. Allow it to
cool before you replace the ribbon cassette.
CAUTION:
Never turn the ribbon cassette’s feed knob in the opposite direction of the arrow marked on
the cassette; otherwise the ribbon cassette may be damaged.
Note:
Use the EPSON ERC-38 ribbon cassette for your printer.
To Next Page
Loading...
Need help?
General