149
• Select Keyboard, then select the Communication Mode field and select Network Folder (SMB)
or FTP. Then select the Location field and enter the folder location, and press OK.
Enter the folder path name for the Location setting in one of the following formats depending on
the Communication Mode setting you selected:
• SMB: \\host_name\folder
• FTP: ftp://host_name/folder_name
• For a network folder or FTP location with a password, select the User Name field and use the
displayed keyboard to enter the user name. Then select the Password field and enter the
password.
• For an FTP location, enter the FTP server port number in the Port Number field. If there is a
firewall between the product and FTP server, select the Connection Mode field and select
Passive Mode.
6. Select Scan Settings.
7. Select File Format to choose the file format for your scan.
8. If necessary, scroll down and change the File Name setting listed under the File Settings heading.
9. Select any additional scan settings as necessary.
10. Press the preset button to save your scan settings.
11. Select Save.
Your product scans your original and saves it in the selected location.
Parent topic: Setting Up and Scanning to a Network Folder or FTP Server
Related references
Control Panel Scanning Options
Related tasks
Selecting the Date and Time
Entering Characters on the LCD Screen
Registering Contacts for Email, Network, or FTP Scanning - Control Panel
Registering Contacts for Network Folder or FTP Scanning - Web Config
Related topics
Placing Originals on the Product
To Next Page
Loading...
Need help?
General
